Sun States Steel Corp Alliance Steel, LLC Ohio Kentucky Steel Stateline Steel, LLC Lane Steel Co. Generation Steel Harvard Steel Sales Heidtman Steel Products Mill Steel Company SteelSpider.com
Not logged in |  Log-in |  Register |  Reset your Password   
Steel Spider
Building Relationships in Excess and Secondary Steel
Change Steel Form:
Bar
Beam
Coil
Plate
Sheet
Tube
Wire

Chappell Steel Co, Inc.

Show Help for this Page
Chappell Steel Co, Inc.
Chappell Steel Co, Inc.
Company Type Processors
Email sales@chappellsteel.com
Phone 313-897-6670
Fax 313-897-8931
Address 3545 Scotten Ave
Detroit, MI 48210
Website www.chappellsteel.com
Company Overview
Chappell Steel Co. is a Detroit based steel service center, operating two warehouses in Detroit for over 30 years, serving the Midwest with a complete inventory of flat rolled products. ISO9002 Certified. We service industries such as: automotive, truck and bus, agricultural, metal furniture, steel tank, material handling, appliance, stove, refuse container, and metal signs.
Facility Overview
We maintain an inventory of .020 to .500 in coil stock for slitting or leveling and 3/16" and heavier plate for fabricators. Our inventory consists of low to medium carbon, high strength (up to Grade 80), A-36, and AKDQ material from .020 to .500. We stock Hot Rolled Bands, Hot Rolled Pickled & Oiled, Cold Rolled, assorted Coated Products, and Floor Plate.
Processing Capabilities
We specialize in "cut to length" sheet, plate, and re-squared sheared blanks. We also level and shear parallelograms and gusset plates.
Equipment Description
Herr-Voss 3/16" X 74" tension leveler
Herr-Voss 12ga X 72" tension leveler
Cauffiel 1/2" X84" roller leveler
Assorted squaring shears capable of handling .020 to .500 thick material.
We can also slit coils, pickle and oil, or degrease any coil.
Carbon Steel Products Handled
Aluminized Sheet & Coil Cold Rolled Sheet, Strip and Coil
Hot Dip and Electro-Galvanized Hot Rolled Sheet, Strip, and Coil
Alloy Steel Products Handled
Cold Rolled Sheet, Strip and Coil Hot Rolled Sheet, Strip, and Coil
Plate
Processing Capabilities
Cut-to-Length Shearing
Coil Limits for this Facility
Maximum Coil Weight
Maximum Outside Diameter
Minimum Outside Diameter
Maximum Coil Eye Diameter
Minimum Coil Eye Diameter
Maximum Gauge 1/2"
Minimum Gauge 24
Maximum Coil Width 84"
Minimum Coil Width










The Steel Spider website (steelspider.com) is owned and operated by Mountain Hawk Corporation. Mountain Hawk Corp. makes no warranties as to the reliability of any users contacted through this website. Users of this website are solely responsible for determining the fitness of each user they contact. Mountain Hawk Corp. and steelspider.com cannot be held liable for any damages, claims, losses, and/or expenses whatsoever resulting from the use of this website. Steel Spider does not verify that the information provided about any company is accurate or correct and does not endorse any companies.








Triamerica Steel Resources Premium Steel Sales Commerce Steel Corp. Grand Steel Products, Inc. Allied Steel Industries Premium Metals Inc. Promet Steel Rapid Metals, LLC Steelmax Corporation Industrial Steel & Fastener