Pinnacle Steel Processing


Company Type	Processors
Email	pinnaclesteel@windstream.net
Phone	419-822-9800
Fax	419-822-9801
Address	7900 St Rt 109 Delta, Ohio 43515
Website	pinnaclesteeldelta.com

Company Overview
Our operation is housed in a 43,750 sq. ft. building that sets on 10 acres along St. Rt. 109. We are just south of the Delta exit from the Ohio Turnpike about a half mile north of Northstar. At our facility we offer both outside storage and heated indoor storage. We have two drive through bays to efficiently handle incoming coils and out going sheets. Our building has two 30 ton cranes and one 40 ton crane for the really big jobs.

Facility Overview
We have a 43,750 Sq. Ft. steel structure heated building. We have two cranes with up to 40 ton capabilities. We also have 10 acres of outside storage available.

Processing Capabilities
Our processing line has been updated and refitted with state of the art electronics, drive’s and controls to guarantee quality and consistency. We have processed coils with great results. We have been able to hold 1/16” length variance, with 1/16" difference when measured diagonally. We have cut coils from 24” to 73”. We have successfully leveled material from 0.057 to 0.375. Our stacker will easily handle 30’ sheets, and we have cut sheets as long as53'. We have produced sheets as short as 32”.

Equipment Description
Herr-Voss Caufield Flattener Bradbury Percission Leveler

Additional Information
We are close enough to Northstar, Worthington, and Fulton County Processing to offer $0.11/CWT transfer from those facilities to our plant. We can also arrange transportation and offer single billing for processing and transportation.

Alloy Steel Products Handled
Cold Rolled Sheet, Strip and Coil	Hot Rolled Sheet, Strip, and Coil

Processing Capabilities
Cut-to-Length	Toll Processing

Coil Limits for this Facility

Maximum Coil Weight	65,000
Maximum Outside Diameter	80"
Minimum Outside Diameter	40"
Maximum Coil Eye Diameter	31
Minimum Coil Eye Diameter	16
Maximum Gauge	.375
Minimum Gauge	.059
Maximum Coil Width	73
Minimum Coil Width	24

The Steel Spider website (steelspider.com) is owned and operated by Mountain Hawk Corporation. Mountain Hawk Corp. makes no warranties as to the reliability of any users contacted through this website. Users of this website are solely responsible for determining the fitness of each user they contact. Mountain Hawk Corp. and steelspider.com cannot be held liable for any damages, claims, losses, and/or expenses whatsoever resulting from the use of this website. Steel Spider does not verify that the information provided about any company is accurate or correct and does not endorse any companies..