KLB Steel Steelmax Corporation Industrial Steel & Fastener Sun States Steel Corp Harvard Steel Sales Matandy Steel & Metal Products Mainline Metals, Inc. Horizon Steel Company West Walker Steel Vision Metals LLC
Not logged in |  Log-in |  Register |  Reset your Password   
Steel Spider
Building Relationships in Excess and Secondary Steel
Change Steel Form:

MD Metals, Inc.

Show Help for this Page
MD Metals, Inc.
MD Metals, Inc.
Company Type Service Center
Email info@mdmetalsinc.com
Phone (708) 728-0005
Fax (708) 728-9911
Address 6499 W. 65th St.
Unit B
Bedford Park, IL
Website www.mdmetalsinc.com
Company Overview
Light to heavy (1/2") gauge slitting, edge conditioning and cut-to-length. Specializing in narrow widths.
Facility Overview
45,000 SF all under crane
Fork Rear, Fork Side, or overhead crane
One 100 ton crane, two 30 ton cranes and one 10 ton crane
Processing Capabilities
Slitting - .50" - 50" Wide. .018" - .500" Thick
Edging - .50" - 18" Wide .018" - .250" Thick
Cut-to-length - .50"-10" Wide. .035"-.400" Thick
Cleaning coils
Equipment Description
- 1/2 X 50"
- 3/8" X 32"
- .250" X 18"
- .187" X 12"
- Tishken .250 X 6" (with cut-to-length)
- Tishken 3/8 X 4" Cut-to-length
- Tishken .187 X 2" (with cut-to-length)
- Gauer .500" X 8"
- Gauer .250 X 10"
Additional Information
HR, HRPO, CR, Galv, and Stainless Steels
.187" slitting as narrow as .500"
3/8" slitting as narrow as .75"
.250 slitting as narrow as .625"
Carbon Steel Products Handled
Cold Finished Bar Cold Rolled Sheet, Strip and Coil
Hot Dip and Electro-Galvanized Hot Rolled Plain or Galvanized Bar
Hot Rolled Sheet, Strip, and Coil
Alloy Steel Products Handled
Cold Rolled Sheet, Strip and Coil Hot Rolled Bar and Light Shapes
Stainless Steel Products Handled
Cold Finished Bar Cold Finished Sheet, Strip & Coil
Hot Rolled Bar and Light Shapes Hot Rolled Sheet, Strip, and Coil
Processing Capabilities
Cut-to-Length Edging
Slitting Toll Processing
Coil Limits for this Facility
Maximum Coil Weight 60000
Maximum Outside Diameter 72
Minimum Outside Diameter 0
Maximum Coil Eye Diameter 30
Minimum Coil Eye Diameter 16
Maximum Gauge .500
Minimum Gauge .018
Maximum Coil Width 52
Minimum Coil Width .500
Association Memberships
AWMI Logo ASD Logo

The Steel Spider website (steelspider.com) is owned and operated by Mountain Hawk Corporation. Mountain Hawk Corp. makes no warranties as to the reliability of any users contacted through this website. Users of this website are solely responsible for determining the fitness of each user they contact. Mountain Hawk Corp. and steelspider.com cannot be held liable for any damages, claims, losses, and/or expenses whatsoever resulting from the use of this website. Steel Spider does not verify that the information provided about any company is accurate or correct and does not endorse any companies.

Allied Steel Industries Kenwal Steel Corporation Mill Steel Company Zeeco Metals, Inc. Triamerica Steel Resources Commerce Steel Corp. Ohio Kentucky Steel Alliance Steel, LLC Delaware Steel Co. Universal Metals