| Steel Type | Partial Description | Location | Date |
| Coil - Hot Rolled | Looking for 2-3 truckloads of c1035 chemistry coils .070-.100 x 20" or wider. Please send chemistry with offer. ... | South Bend, IN | May 09 |
| Coil - Hot Rolled | HRCQ
.068-.082x48-72xCL
90,000#
Please respond to:
billblufly@comcast.net ... | Detroit, MI | May 09 |
| Coil - Cold Rolled | SUPER HOT, ORDERS IN HAND!!!
CR 1008/1010 .0397/.0417 X 3.500 OR WIDER X CL
20,000 - 25,000#
RB 50/75
COILS TO MAKE, GAUGE CAN BE A POINT OR TWO HIGH, I CAN MILL TO GAUGE AS LONG AS I CAN STILL HOLD THE ROCKWELL TOLERANCE
THANKS YOU IN ADV ... | Warren, MI | May 09 |
| Coil - Cold Rolled | Good afternoon. I need to find the following Cold Rolled items.
Cold Rolled CS-B
.027/.032 X 47.750-48.500 X coil
40,000#
Cold Rolled CS-B - full hard
.044-.049 X 47.750-48.500 X coil
40-80,000#
Minor rust, stain OK
HSLA, SS, un-annealed ... | Naperville, IL | May 09 |
| Coil - Galvanized | g90 galvanized min sopangle liteoil no chem treat
.019 x 48 x coil
80,000 lbs
ships to Roll Coaters in Indiana ... | Indiana | May 09 |
| Coil - Galvanneal High Strength Low Alloy | LOOKING FOR THE FOLLOWING:
MS6000 44VA 050XK
.060/.065 X 63.000 X COIL
300 TONS ... | Roseville, MI | May 09 |
| Coil - Cold Rolled High Strength Low Alloy | CR Steel HSLA Grade 50
.037/.041 X 16.400 X COIL 40,000 lbs.
.037/.041 X 16.850 X COIL 40,000 lbs.
.022/.026 X 46.250 X COIL 5000 lbs.
Offer anything close. ... | Nashville, TN | May 09 |
| Coil - Cold Rolled Prepaint | looking for
.044 min black/black CQ prepaint QC2770
approx 20,000 lbs
Being slit
Please advise
Thanks
Chris Gillis ... | Hamilton, Ontario | May 09 |
| Coil - Hot Rolled | I am looking for some .085 to .095 HR 1008 coils
Need 1-5 Truck loads
Prime, excess prime or secondary
I prefer secondary
Please quote a delivered price as well as our pick up
... | Detroit, MI | May 08 |
| Tube - Mechanical | TRUCKLOAD OF 2"SQ X 10 GAUAGE X 24'
DELIVERY ASAP. ... | South Bend, IN | May 08 |
| Coil - Aluminized | 25,000#, .250 MIN X 2.437" (OR MULT) X Coil
grades 10B38 OR 1095 ANNEALED.
An altaernative is:
1045 annealed with ONLY THE FOLLOWING CHEMISTRY:
Carbon = .47-.50
Mang = .75-.90 ... | West Bend, WI | May 08 |
| Coil - Galvanized | Good afternoon,
Do you have..............
HD GALV DS-B+ G-40 NCT-LO
.030/.034 X MASTER COIL 40,000#
Thank you - Dennis ... | Ship Point | May 08 |
| Coil - Hot Rolled P&O | HR P&O C1030
.113/.123 X 11 X COIL
40,000 lbs. ... | Nashville, TN | May 08 |
| Coil - Hot Rolled P&O | Looking for 2,200 lbs. .070/.089 x 1.562 x c 4130 annealed R"B"75 Max. Could use wider coil and slit in house.
Thank You. ... | West Bend, WI | May 08 |
| Coil - Hot Rolled P&O | Looking for 1 load .130/.142 x 2" - 50" coil width HRP&O 1045 Min Grade Annealed R"B"80 MAX.
1 load .172/.196 x 1.8" - 50" coil width HRP&O 1050 Grade Annealed with 0.80 Min Manganese.
15 Ton Max coil weight on both.
Thank You. ... | West Bend, WI | May 08 |
| Coil - Galvanized | Galv Coil G-40+ CQ Dry or Oil
.110-.125 57.25"+ x coil
1-3 truckloads
We need ASAP ... | Kennesaw, GA | May 08 |
| Coil - Hot Rolled P&O | HRPO CQ 12ga x 39" & 41" x 85" long
1 truckload heavy on the 41" wide
Call Emily @ 800-653-7146 or email epeters@olysteel.com if you can offer anything. Delivery would be to our Iowa facility. ... | Bettendorf, IA | May 08 |
| Coil - Galvanized | Basic specs required are as follows:
1. Yield Strength --- greater than 300 MPa
2. Tensile Strength --- greater than 300 Mpa.
3. Width of Roll --- greater than 200mm is OK
4. Thickness --- 0.8 to 1.0 mm for 80% of the stock;
0.4 to 0.8mm fo ... | San Jose, CA | May 08 |
| Coil - Galvanized Prepaint | 26ga Sahara TAN 48.00" X C
5 Tons to 20 Tons
Grade CSB to Gr50 Max.
Please quote shipping point!
NOTE: Can also use this item in
Prepainted GALVALUME
... | Shipping Point | May 07 |
| Coil - Zincalume | .017-.020 Zincalume &/or Acrylic Galvalume
27.50" to 48" X Coil
ANY GRADE!!!
Quantity: 20 Tons to 60 Tons
Please quote shipping point.
... | Shipping Point | May 07 |
| Coil - Hot Rolled | I need several loads of 5/16 C1045
can use plate or coil to level.
can use PO
OFFER WHAT YOU HAVE ... | your plant | May 07 |
| Coil - Hot Rolled P&O | Good afternoon, Looking for the following items.
X-Prime or Prime!
- Clean I can live with some very minor defects.
10Ga. HR or HRP&O or Cold Roll
- Prefer CR. C1006/1010. -
126 / 142 x Coil. Cuts totaling 19.00 inches. ~~~ 1-3 Truck loa ... | Ship point. | May 07 |
| Coil - Hot Rolled | need 2 loads
cq
14 gg (.069- .080)
HR dry
44" +
to be sheeted
... | Cleveland, OH | May 07 |
| Coil - Galvalume | Galvalume AZ50 CQ CTD
.0165 - .021 x 27" or wider
10 -20,000#
- no acrylic coating please ... | Brantford, Ontario | May 07 |
| Coil - Aluminized | Looking for:
.018/.022 x master width for slitting and blanking
CQ or softer T1-13 or heavier on coating
20000#/40000#
Prime or Excess Prime.
Min width 18"
Thanks ... | Advise FOB Point | May 07 |
| Coil - Hot Rolled P&O | looking for slit coil 13 and 12 gage 1.25 wide
trailer load
advise avilability and terms
"mahaller@gmail.com" ... | Montreal, Quebec | May 07 |
| Wire Rod - Bright Wire | looking for one trailerload (40,000lb) per week for the next 6 weeks
0.331 diameter wire or 9 mm diameter rod
in the range C1008 to C1040
please advise availability and cost
" mahaller@gmail.com " ... | Montreal, Quebec | May 07 |
| Coil - Hot Rolled P&O | 14 ga. HRPOCQ 48 x Coil 15,000#
12 ga. HRPOCQ 34 x Coil 20,000#
12 ga. HRPOCQ 44 x Coil 20/32,000#
10 ga. HRPOCQ 50 x Coil 40,000#
Secondary coils for leveling. ... | Dyer, IN | May 06 |
| Bar - Special Quality | EDITED FOR MATERIAL THICKNESS REQUIRMENT
3/8 "steel flats of width 3.5", 5.5", 7.5", 9" and length 20'. All these steel flats should have minimum elongation of 18% and grade more than 65KSI.
1) ASTM A656 Gr.80
2) RQC-100
3) Any 4000 series s ... | Boonville, MO | May 06 |
| Bar - Aircraft Quality | Steel flats of width 3.5", 5.5", 7.5", 9" and length 20'. All these steel flats should have minimum elongation of 18% and grade more than 65KSI.
1) ASTM A656 Gr.80
2) RQC-100
3) Any 4000 series steel ... | Boonville, MO | May 06 |
| Coil - Hot Rolled | Looking for the following items:
ASTM 588 HR Must be "Core-Ten"
10 ga. x 60 x 122 - 134 sheets
" x 60 x 144 - 168 sheets
" x 60 x 156 - 44 sheets
Est. Wt. 111,000#
1/4" x 60 x 146 - 102 sheets
" x 60 x 182 - 18 sheets
Est Wt ... | Riverdale, IL | May 06 |
| Coil - Galvanized | Looking for several loads of G90 CT Dry CS-Gr80
master coil only.
Mostly 20ga(.033m) & 18ga(.044min) ... | Bedford Park, IL | May 06 |
| Coil - Cold Rolled | Good morning,
We are looking for the following:
COLD ROLL CS-B
.039/.043 X 46.50+ X COIL 40,000#
.083/.087 X MASTER COIL 40,000#
COLD ROLL 950 XK
.047/.051 X 58.00+ X COIL 40,000#
Thanks - Dennis ... | Ship Point | May 06 |
| Coil - Hot Rolled | 5/16 HR A-36 x 11.750 x Coil 40,000#
or stock to make ... | Dyer, IN | May 06 |
| Coil - Electrogalvanized | Good morning,
Please let me know if you have steel to offer for the following inquiry.
EG DS-B 60G/60G
.039/.043 x master coil 40,000#
HD GALV 55 MY G-60 CT/NCT
.054/.064 X 42.00+ X COIL 80,000#
Thank you - Dennis ... | Ship Point | May 06 |
| Coil - Galvanized | I AM LOOKING FOR...
2 T/L'S .086 MIN GALV.G30 DQ ( NO IF)
MASTERS, NARROWS,PUPS
PLEASE ADVISE AVAILABILITY AND PRICE
THANKS, DC
ALSO ADVISE JOHN JONES JOHNJ@MATANDY.COM ... | Hamilton, OH | May 06 |
| Coil - Galvanized | Medinah Metals is looking for the following two items.
Secondary Galvanized ASTM 653 G30 +, Chem or non chem, oiled or dry, rb 45 - 65
.014min x master coil 2 - 3 loads
Looking for larger coils need asap
Looking for the material FOB Chicago ... | Chicago, IL. | May 06 |
| Plate - Cobble | Hello! We are looking some Cobble or secondary grade 36 3" Plate for counterweights. ... Tulsa, OK
I have 5" Plate available:
50,000 + 5'2.5 " x 5 ' x 5"
... | Tulsa, OK | May 05 |
| Coil - Galvanneal | I am looking for 200,000 to 800,000#'s 10 ga. A-60, truck load quantities. Please advise availability and price over the next 8 months. ... | Grand Rapids, MN | May 05 |
| Coil - Cold Rolled | Looking for 200,000# of the following>
CR DQ C.02 MIN.
.029/.033 X 37" & Wider.
Thank you,
Gaylord Miller
Horizon Steel Company ... | Shelby Twp., MI | May 05 |
| Coil - Cold Rolled | Looking for...
Cold Rolled #2 Brite Finish
.028/.036 x coil 20,000#
Thanks,
Aaron Tlumak
Michigan Metals, Inc.
... | Fraser, MI | May 05 |
| Coil - Galvanized | 024min and 030min any coating trans ,line stops b85 max all defects ok except no peeling tonnage coils please advise ron wonboy ... | , detroit,mich | May 05 |
| Coil - Hot Rolled P&O | Looking for 9,600 lbs. min. .118/.137 x 1.625 x c HRP&O or better 10b38 Min. - 1065 Grade annealed. Will take more weight and a wider width upto 50" and 15 ton max coil,we can slit.
Thank You. ... | West Bend, WI | May 05 |
| Coil - Hot Rolled P&O | Looking for upto 1 load .240/.260 x 2.500" - 50.00" x c HRP&O 1008/1020. Can handle 15 ton max coil.
Thank You. ... | West Bend, WI | May 05 |
| Coil - Cold Rolled High Strength Low Alloy | 0354m CRH 040XLK up to 050XLK 200,000#'s Master coils 52"+ ... | Dearborn, MI | May 05 |
| Coil - Galvanized | .029min x coil Hd Gal. sec.white rust ok
.054 min x coil Hd 90 ... | Warren, MI | May 05 |
| Coil - Galvanneal | Looking for 3-4 truckloads per week - coated (or painted) coils - no aluminized or galvalume. Slit to 21.25" and delivered to East Palestine, OH 44413. Mic between .028 and .030. Rockwell between 35 and 55. Also looking for 3 truckloads per month - m ... | East Palestine, OH | May 05 |
| Coil - Cold Rolled High Strength Low Alloy | CR Steel HSLA Grade 50
.022/.026 X 45-72 X COIL
20,000 lbs.
Quote anything close. ... | Nashville, TN | May 05 |
| Sheet - Galvanized | PRIME, EXCESS PRIME, SECONDARY GALVNAIZED COILS
CSB TO GRADE 50 - MUST BE G-60 MIN COATING WEIGHT
NO GALVANNEAL OR EG
NO PEELERS, FLAKING, BUCKLES, BELLS WELDS OR LINESTOPS.
GAGES .044 MIN 24 / 72 X COIL PREFER DRY
.054 MIN " "
... | EDISON, NJ | May 05 |
| Coil - Hot Rolled P&O | Looking for 1/2 - 1 load .180/.195 x 4.5" - 50" HRP&O. HSLA,1008/1020. R"B"68-85 MUST. 15 Ton Max coil.
Thank You. ... | West Bend, WI | May 05 |
| Coil - Cold Rolled | Good Morning,
I am looking for...
Cold Rolled CQ RB 65 max
.100/.110 x coil 10-20,000#
mult: 1.5"
Cold Rolled HSLA Grade 45 RB 60-75
.070/.074 x coil 40,000#
Mult: 2.3" **will consider HRPO**
Cold Rolled C1010 RB 65 max
.045/.050 x ... | Fraser, MI | May 05 |
| Coil - Galvanized | Good Morning,
I'm looking for...
HDG G60+ NCT LO RB 40-55
.033/.043 x coil 20-40,000#
mult: 2"
HDG G60+ NCT LO RB 40-67
.038/.048 x coil 20-40,000#
mult: 1.5"
HDG G60+ NCT LO RB 40-67
.040/.046 x coil 20-40,000#
mult: 1.5"
HDG ... | Fraser, MI | May 05 |
| Coil - Galvanneal | Good Morning,
I'm looking for...
GNL EDDS IF (50 max RB)
.076/.080 x coil 40,000#
mult: 5"
Thanks,
Aaron Tlumak
Michigan Metals, Inc. ... | Fraser, MI | May 05 |
| Coil - Galvanized | Looking for:
HD Galv. DQ - softer NCT MS G60+ Oiled
.070min - .080max
narrows and master coils considered
40,000# +
No defects ... | Cleveland, OH | May 05 |
| Coil - Galvanized | .033Min x 2"-48" G60
3 Loads ... | Detroit, MI | May 04 |
| Coil - Hot Rolled P&O | .1875 Nom. x 48"+
2 Loads ... | Detroit, MI | May 04 |
| Coil - Hot Rolled | .068/.082 HRCQ 48"+
2 Loads ASAP ... | Detroit, MI | May 04 |
| Coil - Hot Rolled P&O | .051Min.x5"-48"
1-2 Loads ... | Detroit, MI | May 04 |
| Coil - Hot Rolled P&O | HR P&O CQ C1010-C1015 ( carbon .10/.15)
.066-.072 X 2.204 X COIL
6000 to 10,000 lbs. ... | Nashville, TN | May 04 |
| Coil - Aluminized | Aluminized Steel CQ
.020/.024 X 4-13/16 X COIL ( 5000 lbs.)
.020/.023 X 11.270 X COIL ( 3000 lbs.)
.020/.023 X 3.620 X COIL ( 2000 lbs. )
Will place all together. ... | Nashville, TN | May 04 |
| Sheet - Cold Rolled | Looking for the following:
11 ga CR DQ .114 - .120 thickness
16 ga CR DQ-DDQ .055 - .063 thickness
19 ga CR DDQ - IF .040 - .044 thickness
... | Taylor, MI | May 03 |
| Wire Rod - Black Wire | We are looking for wire rod 8mm and above size
grade 1010 to 1020
300 tons
secondary or excess
please contact
MEGHA EXPORT
Scarborough.Ontario
Canada
1 416 939 4121
1 647 827 5293
contact.JAYESH GANDHI
rahilmaa@gmail.com ... | Scarborough, Ontario | May 03 |
| Plate - Cobble | Hello! We are looking some some Cobble or secondary grade 36 3" Plate for counterweights. ... | Tulsa, OK | May 02 |
| Coil - Galvanneal | Looking for:
Galvannealed A60 NCT CSB Dry preferred.
.046/.055 x 15" mults (master coil wanted)
40 to 60,000 lbs
... | Roseville, MI | May 02 |
| Coil - Galvalume | looking truck loads or what ever you may have...
Galvalume AZ120
18ga x masters
16ga x masters
14ga x masters
Please advise
Thanks
Chris Gillis
... | Hamilton, Ontario | May 02 |
| Coil - Galvanized | revision to earlier request.
looking for .0150/.0160 material
GRADE: CSB
SURFACE: MINIMUM SPANGLE
COATING: G30/G40
TREATMENT: CHEM TREAT DRY
ASTM A653-99
Please contact Monica Moreno at mmore ... | san Antonio, TX | May 02 |
| Coil - Hot Rolled | I need a load of 11ga or 12ga 72 x coil
HR or PO
Secondary or excess
... | your location | May 02 |
| Coil - Galvanized | Grade: CSB; Surface: Min Spangle; Coating: G30/G40; Treatment: Chem Treat Dry, HOT DIPPED GALVANIZE; ASTM A653-99;
Looking for master coils, 40 tons. ... | san Antonio, TX | May 02 |
| Coil - Cold Rolled | I am looking for 2 items please offer best avail.
Cold Roll EDDS,DDS, ~~~~ RB35-47 Max.
Note Chems.
C.02 Min .08 Max. // Mn.50 Max. // Al.02 Min.
.028 Min. / .031 Absolute Max. x 48.000 x C.
1 - 2 Loads.
** Must be suitable to COAT!
... | Ship Point. | May 02 |
| Coil - Galvanized | Stud manufacturer looking to purchase one truck load of .044 min, G90, grade 50 galvanize with certs. May consider grade 50, AZ55 galvalume. ... | Montgomery, AL | May 02 |
| Coil - Cold Rolled High Strength Low Alloy | .026/.029 x 49.65" or wider master coil
Prime cold roll hsla 050xlf
1 cut
Hot!
... | Canton, MI | May 02 |
| Coil - Aluminized | Looking for 1,300 - 3,100 lbs. .335/.414 x 2.406 x c 1008/1020.Would look at drops upto 3.375"
Thank You. ... | West Bend, WI | May 02 |
| Coil - Hot Rolled High Strength Low Alloy | need 20000/3000 076/082hrpo 980 hsla pls advise any for slitting ... | det | May 02 |
| Coil - Hot Rolled P&O | I am looking for price and delivery on 2 truck loads of 11 ga..112/.128, grade 50, slit to 2.275 x coil. Must be able to put a 90 degree bend without cracking the material. ... | Grand Rapids, MN | May 02 |
| Plate - A-36 | I am looking for 180,000#'s of 1045, HR, .375 x 48 x 120 sheets. Please send information with price and availability. ... | Grand Rapids, MN | May 02 |