To provide steel buyers with information about companies that can provide Outside
Processing and other services, we added a feature to enable buyers to identify and
contact Outside Processors physically located near the steel they are considering
buying.
Steel Spider has a searchable inventory that contains steel from over 100 companies.
A search produces a list of steel matching the buyer's requirements. When a user
clicks on the company name for an item, we display detailed information about the
item as well as the information needed to contact the supplier.
We have added a section to the bottom of this detailed information page. This section
displays a banner describing companies near to where the steel is located that are
providing processing and other services. The companies displayed are the five whose
facilities are located nearest to where the steel item is physically located.
The banner contains a company logo, company address, contact information and three
short lines to briefly describe the company's capabilities. If any Outside Processor
would like to have a banner for their company's facilities displayed in this section
or have any questions either give me a call (412-963-6180) or send me an email (
). There is no charge
to have your company included this year.
Outside Processors can add their company to the Facility Directory. Register and
go to
under Personalize and
describe your company. In addition to basic contact information you can describe
the processing services you perform. There is no charge to include your company
in the Facility Directory.
|
The following Toll Processors are using this service.
|
Edge Trim, Inspect, Rewind, Slit, Split, Warehouse
|
|
|
Blank, Edge Trim, Inspect, Package, Rewind
Schlear, Slit, Split, Warehouse
|
|
|
32,000 sq. ft. facility with truck and rail access (near I-75, US-23, I-80)
ARCCO Processes: Wash/Dry, Wash/Brush & Coat (w/ oil or dry film)
.010-.100, 11”-70”, 50,000# Max ISO 9001-2008 Certified
|
|
|
We specialize in cutting, polishing, shearing and gauering
stainless steel from 24ga up to ½ thick. We also cut to length
aluminum, galvanized, painted metals and coated carbon.
|
|
|
20,000 sq ft heated warehouse with 4 cranes 5 to 25 ton.
State of the Art computer system. Established quality systems.
ISO 9001:2000 registered. 72" Iowa Precision Slear
48" Shear
|
|
|
Toll processing of all carbon steel products
Slear(.024-.207 x 5"min / 8 mults x 12"-144") x 12"-144"
Slitter (.024-.265 x 72") Trap Line (.020-.090) x 72"
|
|
|
Chicago Steel warehouses, slits, tension levels and cleans and dries coiled steel products.
340,000 Square Foot temperature controlled storage and processing facility.
tension level - .010 min through .125" max gauge in widths ranging from 18" through 72"
|
|
|
150,00 sq ft facility in Northwest Ohio since 1963.
Herr-Voss precision level lines & shears.
22g thru 1/2” x 73.5 max width. ISO 9000:2001 certified
|
|
|
Coil :CRS/Galv, EG Surface Critical, Prepaint, HRPO
72" Slitting Line with Packaging Line, .008 - .1875
Rail and Storage capabilities. JIT Delivery
|
|
|
Slitting, Cut To Length, Edging and Warehousing
36" - 5/16" max slitter, 72" - 1/4" max slitter
72" - 1/4" max - Cut to Length, 6" x .220 - Tishken Edging Lines
|
|
|
Colonial Metal Products operates two Braner Slitting Lines.
Our technology assures that you receive tightly wound coils
that meet your specifications to efficiently produce your product.
|
|
|
Our state of the art equipment allows us to slit material
from .008 through .135 inches in thickness with
tempers ranging from DDAK through CQ to Full Hard.
Crystal Steel Corporation
50 Log Bridge Rd.
Middleton, MA 01949
|
Patrick O'Leary
Ph:
978-774-9988
Fax:
978-774-3171
patrick@crystal-steel.com
|
|
|
|
Class I climate controlled warehouse/automotive distribution center
Rail served; Full EDI
Domestic and export packaging
|
|
|
Dockside offers a gauge range of .010 - .250 slitting and
.016 - .135 leveling and blanking, with a 65,000# by 72" coil
capacity to meet nearly any processing need.
|
|
|
Largest toll processor of flat rolled in the South
including slit, level, warehouse and in-house transportation.
Slitting: .054 - .625" thick x 2"/72" wide
|
|
|
Five multiple head polishing and coating lines along
with a 72" wide cut to length multi blanking line as
well as coil press and sheet blanking capabilities.
Flat Rock Metal
26601 W. Huron River Dr.
Flat Rock, MI 48134
www.frm.com
|
Mr. Keith King
Ph:
(734) 782 - 4454
Fax:
(734) 782 - 4773
kking@frm.com
|
|
|
|
Greenpoint Metals (GPM) supplies high quality slit steel products.
GPM's 150,000 sq.-ft. climate-controlled facility
houses two 72" slitters for slitting gauges from .015 to .250.
|
|
|
Corrective Level, Flatten, Edge Condition, Slit, Split,
Edge Trim, Shot blast (gauge .090-.500; width 4”–75” max)
Rail access, short lead times, storage
|
|
|
Our state-of-the-art slitting and packaging equipment can
meet critical processing requirements.
.010" to .150" thickness range
|
|
|
We start slitting where most distributors stop.
18" and 36" slitters. - .003 through .080 carbon and .003 through .050 stainless
From .200" wide and on very unique ID's from 2" through the standard 16" to 24".
|
|
|
Kennedy features a 60" 45,000# max coil .008-.250 slit capabilities
along with 2 Cut to Length Lines for heavy and light gauge.
We are conveniently located midway between Pittsburgh, Pa and Cleveland, Ohio.
|
|
|
Tension Leveling, Elostrostic Oiling, X-Ray Gauging, Edge Trimming
Rail Service, Coil Over and Under-winding
Gauges: .030-.375
|
|
|
Lane Steel is a full service flat rolled products Service Center
specializing in Galvanized, Galvalume, Painted, Cold Roll, Galvalume,
Painted, Cold Roll, Hot Roll and HRP&O coils, slit coils, sheets and blanks.
|
|
|
Leveltek Processing for Stretcher Leveling, Trimming, Cut-to-length and Storage
The Leveltek stretch leveling process - Uncoiling, Stretching, Leveling and Re-coiling.
Maximum Coil Width 96” - Maximum Coil Thickness .500”
|
|
|
Leveltek Processing for Cut-to-length,
Slitting, Storage
Stretcher leveling and multi-blanking.
60" Width Maximum - 72" Coil O.D. Maximum - 44,000# Maximum Weight
|
|
|
70,000 square feet to meet your processing and storage needs.
Two slitters that can process material thickness from .020 to .250 gauge
up to 80,000# coils and 84" in width.
|
|
|
Our 35th year. Quick processing lead times and tight tolerances.
Slitting with Inline Leveling, Cut-to-Length, Edging, Corrective Leveling,
Shearing, Warehousing, Material Inspection, and Isotope Thickness Gauge Measurement.
|
|
|
Capabilities: .008 – 3/16”. 50,000# max coil weight.
60” Braner Slitter, 60” Pro-Eco Slitter (dual head)
40,000 Square Feet
|
|
|
Light to heavy (3/8") gauge slitting, edge conditioning and cut-to-length.
Slitting - .50" - 32" Wide. .018" - .400" Thick
Edging - .50" - 18" Wide .018" - .250" Thick
|
|
|
MPC is a total solutions processor/logistics supplier.
With rail access and 300,000 sq. ft. of warehouse space,
we provide high quality slit coil and cut sheet to your specifications.
|
|
|
Material processing is available for steel coil products ranging
from 30 gage to 10 gage in thickness and can level master
coils up to 60 inches wide and 30,000 lbs in various material grades.
|
|
|
We perform the following services: slitting, shearing,
precision metal blanking, storage, toll slitting, leveling, cold reduction, and edging.
and edging.
|
|
|
TS/ISO certified slitting processor for flat rolled products.
Warehousing capabilities. Truck fleet for local pick up & delivery.
Slitting, edge trim, inspect, rewind, split, ID cores.
|
|
|
Coating: Pickle & Oil, Pickle Dry & Dry Lube
Slitting: From .026 to .375. Max. Width 72".
Rail services; Full EDI; 14 Acres of Indoor and Outdoor Storage.
|
|
|
Slit, Blank, Cut to Length
|
|
|
Slit, Blank, Cut to Length, Punch
|
|
|
Slit, Cut to Length
|
|
|
Slitting, Cut-to-length, Shear, Lab testing
Two plants totaling 244,000 sq ft
NS/CSX rail service at both sites
|
|
|
Precise Metal Products
Slitting: From .017 to .120. Max. Width 27". 10,000# Max
Reducing Mill - 5" width - from .017 to .118
|
|
|
48" Slitter, 36" Slitter, 7" Four High Rolling Mill,
Cut To Length, Blanking, Maintaining Inventory,
Trading, Storage/Toll Processing Programs.
|
|
|
Security Steel is a Processor of Steel and other metals.
Slitting on a 24" slitter down to .450 wide from .060" to .320".
Coil edge and cut to length up to 8" wide.
|
|
|
Slit and store steel
48.000" slitter cut from .500 to 50.000"
ga from .015 to .150 20/24 ID - 32,000# max on slitter
|
|
|
Your source for Toll Conversion of Hot Roll to Cold Roll, FHCR to CQ, and Spheroidize Annealing
Input gages from .180” to .047” / output gauges from .095” to .015”
Call SRH for all of your toll conversion needs
|
|
|
Target Steel - superior, full line steel service center in Michigan.
With over 25,000 square feet of facility and storage, you
can feel confident your material will be handled with care.
|
|
|
24" 4 High Cold Reversing Mill for close gauge tolerance strip, shape control and finish.
Additional processing capabilities: Annealing and slitting.
Gauge Range: .015-.185 Grade: CS - c1095 and alloy grades
US STRIP STEEL & PROCESSING
4809 Tod Avenue
East Chicago, IN 46312
|
Doug Labuda
Ph:
216-524-4400
Fax:
216-524-4494
Doug@MuirfieldMetals.com
|
|
|
|
Blank, Dry Lube, Inspect, Pickle, Slit, Tension Level, Wash
|
|
|
Inspect, Pickle, Slit and Tension Level
|
|
|
Steel Sales and Processing
Can Process Coils up to 43,000#, 60" max, .012 - .085.
|
|
|
Xcel Steel Processing (Toll Processor)
Pickling .045 - .500 Thick X 17” – 73” Wide X-Ray Gauge, Width Chart, Rail Service
Slitting .028 - .500 Thick X 72’ Wide CR, GALV, HRPO, HRBK
|
|
|
|
|